Re: [Paddlewise] telescoping whip..VHF

From: MarcJensen <marcjensen_at_earthlink.net>
Date: Thu, 5 Mar 1998 07:01:59 -0800
> A telescoping whip isn't necessairly going to provide a 
> noticible improvement over a rubber duckie. You'd have to 
> set the length using an SWR meter and then it will only be 
> marginally better then a 1/4 wave RD and probably no where 
> as good as a 5/8 duckie.
> 
> BTW, I have talked to Europe using 0.5 watts... but the 
> antenna was 66 feet wide and 88 feet long...

I have access to NiTi super elastic wire (the metal used in the fancy
eye glass frames).  I could make an antenna that would stand up 3 to
4' in length but fold up to a little ball.  You could even wrap it
around the VHF unit.  The question I have is what length would you
make the antenna?  I could potentially make two or three of these
to try out if anyone is interested.  I would need to make the O.D.
more conductive but I have several way of doing that.

Marc.




"If the Women don't find you handsome, they should at least find you 
handy!"
Red Green

***************************************************************************
PaddleWise Paddling Mailing List
Submissions:     paddlewise_at_lists.intelenet.net
Subscriptions:   paddlewise-request_at_lists.intelenet.net
Website:         http://www.gasp-seakayak.net/paddlewise/
***************************************************************************
Received on Thu Mar 05 1998 - 07:14:28 PST

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:29:53 PDT