-----Original Message----- From: Dana A. Dickson [mailto:danaadickson_at_unn.unisys.com] Sent: Monday, June 22, 1998 9:31 AM To: PaddleWise Subject: [Paddlewise] Electric Bilge Pump Questi Last Friday I purchased a pump and fittings to install an electric pump in my kayak. The pump does not have a built in check valve. Nor does the port for the side of the boat. How do those of you with similar systems keep from flooding your cockpit through what appears to be a 1 1/8 inch (29 mm) diameter hole in the boat? Thanks for the help. Dana Dickson ************************************************************************** * My foot pump has built-in check valves. Have you checked with the pump dealer? There might be an accessory check valve you could install on the outlet. Chuck Holst *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Mon Jun 22 1998 - 07:46:31 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:29:57 PDT