> Yeah, Greg --- for a start, you don't really have to drill holes. I built up > a set of foam blocks aft of the forward bulkhead which serve as a <really> > comfortable footrest, and now house my footpump, as well. Just carved away Yes, this is what I have in place as well... I opted to not install foot pegs and have the foam in its place. It's very comfortable right now. > the part of the foam that looked like a pump, jammed it in there, and that was > it! Suction hose comes down to a strum box --- a wedge-shape fiberglass > pickup widget sold by the same folks who sell pumps, and definitely at least a > nice-to-have if not a gotta-have to make the pump work most efficiently --- > just forward of the seat, the lowest point in my Pintail. I don't have a strum box, sounds like I should get one... how did you attach the hose and strum box to the lower deck? > My exhaust port is on the side, with the outlet fitting just below the > fiberglass seam. Have never noticed a problem with leaks --- RTV the fitting > when you go through the hull, and the flapper valves in the pump should keep > water from coming in any further than the housing, if it comes in that far. What's RTV? > You <can> pump out through the deck, and a lot of people configure pumps that > way; it cuts down on the plumbing runs, but you run the risk of nailing > yourself with a mouthful of bilge water when pushing into the wind. And the > speeds you paddle at, you don't need wind! That decision is really just a > judgement call. > > Good luck --- lemme know if you want to see my installation first. There's a > tiny chance I might make it to Wye Island tomorrow. If you're there tomorrow, I'd like to take a look at you setup... I hate to drill holes in a new boat!! Greg *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Fri Sep 18 1998 - 12:53:58 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:29:59 PDT