Re: [Paddlewise] inner hull tie devices

From: Michael Daly <mikedaly_at_interlog.com>
Date: Thu, 21 Jan 1999 10:51:23 -0500
WildConect_at_aol.com wrote:

> I have had success with the plastic D-rings with plate and using Marine Goop
> to "glue" them in place under the deck in my cockpit of my Romany 16.

I've done similar.  I sewed the D-rings to a square of Cordura with webbing
(actually, two layers of Cordura).  I sew it so the rough surface of the Cordura
is on the opposite side from the D in order to give the glue lots of fuzzy bits
to stick to.  I used 3M 5200 as adhesive.  No problems so far.

Mike





***************************************************************************
PaddleWise Paddling Mailing List
Submissions:     paddlewise_at_lists.intelenet.net
Subscriptions:   paddlewise-request_at_lists.intelenet.net
Website:         http://www.gasp-seakayak.net/paddlewise/
***************************************************************************
Received on Thu Jan 21 1999 - 08:49:28 PST

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:03 PDT