I have seen the fitting you describe on pumps in boats with permanent pumps. A pump with a hose inlet rather than the open inlet on the standard bilge pump would have to be used. Rule makes a live well pump that might work, although I suspect that the live well pump like the bilge pump will need to be submerged to be primed. Dana Dickson MIS CIH CSP Principal Industrial Hygienist Unisys Corporation -----Original Message----- From: Bob Denton [mailto:BDenton_at_aquagulf.com] Sent: Tuesday, January 12, 1999 4:48 PM To: Dickson, Dana A.; 'PaddleWise_at_lists.intelenet.net' Cc: 'JCMARTIN43_at_aol.com' Subject: RE: [Paddlewise] Electric Bilge Pumps I believe Valley sells a box type fitting for the hose that will remove most of the water from the bilge. The actual name escapes me at the moment. cya *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:32:56 PDT