Chris & Ellen Kohut wrote: > Which reminds me..........here I am trying to put together a surf > boat in the garage and fuming and generally working myself into a > lather about an appropriate" mold release agent" any of you out there > have any experience with mold release agents or wax? And could you > steer me in the correct direction? > Many thanks > Chris What is it you are trying to keep from sticking to what? If I were you and didn't have access to industrial mold releases I would use Johnson's floor wax paste or a very high carnuba content hard paste wax. Wax and buff 6-7 times leave a little time in between. If I were me and in a hurry and doing a one off, I'd skip the wax and spray on a nice heavy layer of PVA (polyvinylalcohol) in several light coats with high atomization and dry time in between each one. Regards, Steve Freund (888) 794-3887 QCC Kayaks http://www.qualitycomposites.com *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:32:56 PDT