Dave - Thanks for the good advice. We are lucky to have a chemist among us! I've determined that my basement, at the present season, goes down to 56 degrees at night, so I certainly ought to be able to pre-warm the work area, as you suggest, with a few space heaters (there is no heat source other than heat accidentally thrown off from the furnace, and a fireplace whose use would be ill-advised). There's not an openable window in the whole space, but there are the Bilco doors, through which large objects may be carried and large volumes of cold air may enter. Are there concerns about ventilation when using epoxy, resin, varnish, etc? Might it be sufficient to open only the fireplace flue for air circulation, or would I have to open the doors? Thanks for sharing your knowledge with us... Anne *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Sun Mar 14 1999 - 07:23:23 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:05 PDT