There was a discussion a while back on rudder/skeg repair (just loaded to the archives). The main thing I got out of it was the suggestion of using a marine (sailing) rigger for possible repairs. What sort of maintenance, if any can/should be performed on them? I hose the outside down pretty good after each use but not the inside. Other than eyeballing the cable occassionally, I don't know what else to do. I don't use the rudder often and usually don't check to see if it's working until I need/want it. A few times it would not lower when required and I don't think it's ever raised on request. I may need to perform some adjustments on the lines and yes, they're (usually) uncleeted when I try to raise/lower the rudder :-). Clyde Sisler http://csisler.com *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Fri Apr 16 1999 - 17:23:23 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:07 PDT