I've also used Hydrogrip from Perception to outfit whitewater boats and it's always worked fine. roughing up the surface definitely helps. There's a solvent with a 3 letter acronym beginning with 'M' that will clean the area to be glued without melting the boat. Can't remember the other 2 letters, but it was recommened by Dagger and I bought it at Home Depot. Might be worthwhile to check with your boat's mfgr just to be safe. It's important to follow the Hydrogrip instructions carefully. Put a coat on each surface, let dry, put on a second coat, let dry, then stick 'em together carefully. Once they're together they won't come apart! *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Thu Jul 08 1999 - 15:38:11 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:10 PDT