>My Folbot Greenland II has a six inch long scrape on the hull which penetrates >the weave under the outer layer of Hypalon. I have some spare hull material, >but do not know what adhesive to use to paste it over the rip. Most of us outfitters buy a lot of our repair materials from: B&A Distributing Company 201 S.E. Oak Street Portland, OR 97214 (503) 230-0484 They have a large selection of raft parts, repair parts, materials and glues. For Hypalon pin holes, scrape and touch-up of old Hypalon rafts try the Gaco Neoprene Paint. This paint can add a few years to old Hypalon rafts and hulls. For glue there is a one part glue called Shore Adhesive this is the glue you'll find in most Hypalon raft repair kits. There is also 2 part glues that are a lot stronger B&A also carriers a 2 part Shore Adhesive. 2 parts are a little harder to work with. Ron Clauson Backcountry Safaris http://www.backcountrysafaris.com *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Mon Aug 16 1999 - 06:23:05 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:12 PDT