PaddleWise by thread

From: johncw <johncw_at_narrows.com>
subject: [Paddlewise] Stabalizing for Photography
Date: Tue, 21 Sep 1999 03:25:35 -0700
Dan;





Let me explain it another way.





Many kayak stores sell plastic fittings.  The eyelet I am talking about is a
piece of black plastic shaped in a "U" with the ends splayed so that bolts can
fasten each end of the "U" to the deck.  You will want two of these.  The
hook, made of the same material, looks kind of like a fish hook.  It is shaped
like a "J" with a hole through the longer end which allows it to be bolted to
the deck.  You will need one of these.  There are many designs of jam cleats.
I am thinking of the black one sided ones that you see on the Valley and Nigel
Dennis boats which lie fairly flat and are used by them to secure the skeg
line.





Bolt the eyelets one each on either side of the deck, lets say, 12 inches in
front of the cockpit coaming.  Next, bolt the hook 6 inches (or whatever) in
front of the cockpit with the opening of the hook facing you.  Bolt the jam
cleat 3 inches forward of the eyelet on the right (or left if you prefer).
Now put the line through one of the eyelets and tie a knot in the end of the
line.  Put the other end of the line through the other eyelet and tie a knot
in that end.  Place your paddle in the space between the eyelets and the hook
(it will be perpendicular to the boat).  Grab the line and pull it over the
paddle and engage it into the hook.  Grab the end of the line that is near the
cleat and push (pull) on the line and when it is tight stick it into the jam
cleat.   The line will be pulled down tight against the paddle shaft and the
jam cleat will hold it fast. 


Does this help?





John Winskill





***************************************************************************
PaddleWise Paddling Mailing List
Submissions:     paddlewise_at_lists.intelenet.net
Subscriptions:   paddlewise-request_at_lists.intelenet.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: <dmccarty_at_us.ibm.com>
subject: Re: [Paddlewise] Stabalizing for Photography
Date: Wed, 22 Sep 1999 09:55:44 -0400
Yep, that did it.  I could not tell if the hook actually held the paddle shaft
or the line.

My original concern on this was that the paddle would be force up and the line
would easily pull from the cleat.  But I guess the eyelets keep the line flat so
it says in the cleat.

Thanks for the info.
Dan McCarty



***************************************************************************
PaddleWise Paddling Mailing List
Submissions:     paddlewise_at_lists.intelenet.net
Subscriptions:   paddlewise-request_at_lists.intelenet.net
Website:         http://www.paddlewise.net/
***************************************************************************

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:33:03 PDT