RE: [Paddlewise] Durability; Royalex<->FRP

From: Chuck Holst <CHUCK_at_multitech.com>
Date: Mon, 10 Jan 2000 11:05:17 -0600
>>>
This will probably be comparing apples with eggs, but I assume a Wenonah
Jensen 18 built in Royalex should weigh not much more than 30 kg/66 lbs?
That can hardly be called heavy?

My own Royalex touring canoe (an American model of course, but only
available in Europe!?) which is comparable to the Jensen 18, weighs 30.5
kg/67 lbs. But being made from Royalex it gives me at least much more
'peace of mind' in demanding situations, while portaging is still a
bearable option for me. Of course, if this model was available in a vacuum
bagged Kevlar 'expedition' lay-up weighing say 27 kg/60 lbs, I would now
start saving money for it. But I admit to probably hold on to my Royalex
version for the somewhat more difficult rivers, more for psychical than
physical reasons, because the performance would probably be almost the same
as the FRP version.

Dirk Barends
the Netherlands
>>>

I think early Royalex canoes weighed about the same as standard-weight
aluminum canoes -- about 76-80 lbs. -- but a visit to the We-no-nah Web site
at http://www.wenonah.com/ showed me that their current Royalex models run
mostly about 62-66 lbs., which is about the same as their heaviest FRP
layups, so you are correct, though I consider 66 lbs. a tad on the heavy
side for long portages.

Chuck Holst
***************************************************************************
PaddleWise Paddling Mailing List - All postings copyright the author and not
to be reproduced outside PaddleWise without author's permission
Submissions:     paddlewise_at_lists.intelenet.net
Subscriptions:   paddlewise-request_at_lists.intelenet.net
Website:         http://www.paddlewise.net/
***************************************************************************
Received on Mon Jan 10 2000 - 09:01:31 PST

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:18 PDT