David: I have a shortened cockpit. My idea about installing a foot pump is to cut a hole in the forward bulk head and mount the footpump behind the bulkhead with the pump jutting out into the cockpit, and glass up behind the bulkhead to seal the pump in. Can't you glass onto glass? Robert David Seng wrote: > You probably can't epoxy anything to the bulkhead itself, but I'd think that > you would be able to push the plywood up tight against the plastic bulkhead > and then use an epoxy paste to create a fillet joint between the epoxied > plywood and the hull/deck. Then use some 1.5" or 2" tape and glass in a > couple of layers over the fillet. > *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Tue Jan 18 2000 - 19:59:18 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:18 PDT