>> Another reason is I thought the bulkhead would be much stronger if I could glass the seam tape on both sides of the bulkhead. The plywood may give a better place to mount the pump screws and washers (they would have to contact the plastic bulkhead if not removed). >> You might be making more work for yourself than necessary. My Romany's fiberglass forward bulkhead has seam tape on only one side, and I have never had a problem with it, even though my foot pump is mounted on it. And it wasn't filleted with epoxy paste before the tape was applied, either. Chuck Holst *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Wed Jan 19 2000 - 07:59:57 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:18 PDT