My most sincere thanks to Scott, Woody, Tom and Dave. Your prompt responses confirmed my suspicions of having purchased a "bad" tube. Having this list to fall back on for advise, I feel like a contestant on "Millionaire" calling their "Lifeline" In my impatience I used 2 part epoxy from MAS instead of the recommended 5200 to glue up the bow and stern blocks on my north Alaskan recovery kayak project. Hopefully this wasn't a major mistake. Is it safe to assume that rougher surfaces bond best with the 5200 as opposed to smooth surfaces? The rougher the better? Thanks again everyone Jed *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Mon Jan 31 2000 - 07:33:36 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:19 PDT