Nick Von Robison wrote: > I have a Yakima system on the jeep with "hully rollers" on the back bar, and an > adjustable saddle on the front bar. The Yakima cross bars are round in cross > section, and no matter how much I tweak the locking bolts there is still some > roatation of the cross bar when taking off/putting on the boat. It's not a big > deal, but mostly a nuisance as I have to readjust the rollers every time. Contact cement a layer of 220 grit wet-or-dry emery paper on the inside of the clamps -- mine have not budged since I did that. Yakima should have fixed this in the design phase. It really is a PITA. -- Dave Kruger Astoria, OR *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Tue Mar 14 2000 - 18:44:59 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:21 PDT