"William J. Oetjen" <woetjen_at_zoo.uvm.edu> writes: <<We bought this beauty used and a previous owner had pulled the original seat and cut out a slab of closed cell to fit in the cockpit. That's all they did. cut it out and no shaping, nothing. My sig other lasts about fifteen minutes in this otherwise superb boat before her legs go NUMB!>> Simplest is to shape the foam you have if it is long enough. It is simple but messy. Do it where the clinging "stuff" won't drive you nuts. You can contact Necky and see if you could buy a seat to fit. You can find other comercial seats in several places or you can buy new foam and start from scratch. I ended uup putting an addition to my original foam AND putting a wedge under the front. Good luck, Joan Spinner *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Mon May 08 2000 - 10:15:45 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:24 PDT