Dave, If you ever want to get that screw out again, fill the hole with epoxy slurry, drill it, and then re-set the screw. If you want it set permanently, set it in freshly mixed epoxy. If you set it in freshly mixed epoxy and it cures (as epoxy has a notorious habit of doing) and you really want to remove the screw someday, heat the head of the screw with a soldering iron. Epoxy will soften with enough heat. Shawn *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Sun May 14 2000 - 08:08:22 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:24 PDT