Steve Cramer wrote, "[toggles are] easy to make. Take a 4-5" (10 cm) piece of 1" PVC thick wall pipe. Drill a hole in the center just big enough to jam in both ends of some 5mm climbing rope. Pull one end of the rope out each end of the pipe and tie a figure-of-8 knot in the end.> An alternative on that is to use the 45 degree angle PVC pipe joints. Then, with a hole in the "sharp" angle, all as above. Makes an easy carry. Jack *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Sun Jun 18 2000 - 18:42:08 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:26 PDT