>2. A compact poprivet tool (don't have this yet; any recommendations?). Cut the handles off/drill lightening holes all over the handles? >3. A compact hand-operated drill for a 3/16 inch bit -- for drilling out old >rivets and making holes for replacements. Tried using a drill chuck I had >around, but hand twisting the bit with it is not going to cut it. An old fashioned "yankee screwdriver" drill with a 3/16" bit. Requires a special shank--you can't use a regular HSS drill bit for a 3-jaw chuck. Or, an "eggbeater drill" which would accommodate a regular bit. Shawn *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Tue Jul 04 2000 - 11:40:30 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:27 PDT