I have mounted removable navigation lights on my Valley Avocet that would readily double as flag holders. West Marine sells the Aqua Signal battery-powered lights in bow (red/green) and stern (360o white) configurations, with a choice of a suction cup base, or a 2" vinyl flange, for gluing to inflatables. I bought the flange model, cut off the flange, and through-bolted the flexible vinyl socket into the bow and stern flush deckline fittings. This required only a slightly longer stainless screw and a washer. The sockets are very inconspicuous when not in use. A flagstaff could easily be made from aluminum or fiberglass tubing. A section cut from an orphan ski pole would be about the right size. If you opt for a suction cup mount, be sure you attach the assembly to the boat with a separate lanyard. West Marine: www.westmarine.com Search for Part# 363302 Dan Harrison (determined to be seen on Lake St Clair) *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Fri Jan 12 2001 - 09:25:03 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:36 PDT