I used Marine Goop to install a VCP day hatch kit a few years ago and it's performed flawlessly ever since. Unbolt and remove the rims and clean off the old adhesive. If your hatch doesn't have bolts, I would install three at the same time. Goop is pretty viscous, so I would try to apply as evenly as possible. Another very permanent option would be 3M 5200, but I found the Goop easier to work with faster setting times. cu *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Mon Apr 23 2001 - 09:05:16 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:42 PDT