Jochen, Please post the pictures, and any more instructions on the wiring you'd care to give. Thanks, Jack ----- Original Message ----- From: Jochen Grikschat <grikschat_at_surfeu.de> <snip> > I got an 12V Accu in my kayak and wanted to use this for my GPS, just to safe > expensive battery and to use the GPS longer. So I place the GPS like Steve > in a Aquapac bag, but put in the 12V adapter, glue in a cable and the cable > I could fit to a flat and waterproof plug connection, fitted to my rear deck > left side behind my cockpit. > So, the GPs is floatable, it is fixed by the cable and I could use it > NONSTOP WITHOUT changing the batteries. Now I got a pic from this special > bag (where I have to put on a little bit more glue to the cable) and the > Aqua Signal plug connection. > I think this is solution, which must be interesting for more paddlers. I > could send the pics out... > *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:33:21 PDT