A hacksaw blade with the teeth ground off, and sharpened to an edge, works well when used in a jig saw. This type of reciprocating blade is used by most industrial foam cutters. Ron *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************
It would be nice to figure out that fence thats attached for alignment Ron. Any thoughts? Ron and Barb wrote: > > A hacksaw blade with the teeth ground off, and sharpened to an edge, works > well when used in a jig saw. This type of reciprocating blade is used by most > industrial foam cutters. > > Ron > -- ¤ Gabriel L Romeu ¤ http://studiofurniture.com + /diary or + /paint *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:33:21 PDT