PaddleWise by thread

From: Joshua Teitelbaum <teitelba_at_post.tau.ac.il>
subject: [Paddlewise] Cranked or Bent Shaft paddles
Date: Thu, 15 Nov 2001 10:07:19 +0200
Thanks to all those who passed on the info about AT and Current Design 
paddles.  AT certainly has some big fans out there.

I know that Lendal is supposed to come out with a new blade that is carbon 
cloth impregnated (is that right?) with resin that is supposed to be 
lighter.  Of course, one must try a paddle before buying, and Lendal is the 
only kayak paddle sold here.  But I hope to be in the states in July or so 
(perhaps and Alaska paddle!) and will try to try out the AT and the Current 
design (hope I can find them in LH feather!)

Josh


==============================================================================
Dr. Joshua Teitelbaum, Research Fellow               Tel: [972] 3-640-6448
Moshe Dayan Center for Middle Eastern and        Fax: [972] 3-641-5802
   African Studies
Tel Aviv University
Ramat Aviv, Tel Aviv 69978  Israel
E-mail:teitelba_at_post.tau.ac.il
www.dayan.org
==============================================================================

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Larry Koenig <paddlin_at_home.com>
subject: Re: [Paddlewise] Cranked or Bent Shaft paddles
Date: Thu, 15 Nov 2001 16:55:26 -0600
Josh Teitelbaum had written:> I know that Lendal is supposed to come out
with a new blade that is
> carbon cloth impregnated (is that right?) with resin that is supposed to
be
> lighter.
Lendal has out now a prepreg carbon blade that is quite nice.  They had,
some years back, quit making their basic carbon fiber blade but now have
come up with the technology to produce it reliably.
Lendal has also been working on a modified wing style blade that I'm anxious
to see. If it works as hoped, it will be useful for high braces and all the
other touring type strokes that are now precluded by the standard wings.
Larry Koenig
Baton Rouge,LA

----- Original Message -----
From: "Joshua Teitelbaum" <teitelba_at_post.tau.ac.il>
To: <paddlewise_at_paddlewise.net>
Sent: Thursday, November 15, 2001 2:07 AM
Subject: [Paddlewise] Cranked or Bent Shaft paddles


> Thanks to all those who passed on the info about AT and Current Design
> paddles.  AT certainly has some big fans out there.
>
 Of course, one must try a paddle before buying, and Lendal is the
> only kayak paddle sold here.  But I hope to be in the states in July or so
> (perhaps and Alaska paddle!) and will try to try out the AT and the
Current
> design (hope I can find them in LH feather!)
>
> Josh
>
>
>
============================================================================
==
> Dr. Joshua Teitelbaum, Research Fellow               Tel: [972] 3-640-6448
> Moshe Dayan Center for Middle Eastern and        Fax: [972] 3-641-5802
>    African Studies
> Tel Aviv University
> Ramat Aviv, Tel Aviv 69978  Israel
> E-mail:teitelba_at_post.tau.ac.il
> www.dayan.org
>
============================================================================
==
>
>
***************************************************************************
> PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
> here are solely those of the writer(s). You must assume the entire
> responsibility for reliance upon them. All postings copyright the author.
> Submissions:     PaddleWise_at_PaddleWise.net
> Subscriptions:   PaddleWise-request_at_PaddleWise.net
> Website:         http://www.paddlewise.net/
>
***************************************************************************

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Thomas Mitchell <mitchell_at_nwlink.com>
subject: Re: [Paddlewise] Cranked or Bent Shaft paddles
Date: Thu, 15 Nov 2001 18:10:30 -0800
Werner also has a bent shaft touring paddle and a new version with a foam 
core blade.  I have a Werner WW paddle with their version of a bent shaft 
and I prefer it to the AT.  It feels much more natural to me.

http://www.wernerpaddles.com/premtour.htm

FWIW - I went back to my straight shafted Lightning for a recent kayak 
surfing session.  After a long, fun outing, my wrists were killing me.  The 
Werner bent shaft never bothers them at all.

I'm tempted by the Werner but I already feel guilty about using an 
ultra-light carbon Lightning as a spare paddle (since I'm usually using a 
'stick').

Thomas

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Michael Daly <michaeldaly_at_home.com>
subject: Re: [Paddlewise] Cranked or Bent Shaft paddles
Date: Mon, 19 Nov 2001 00:00:41 -0500
From: "Thomas Mitchell" <mitchell_at_nwlink.com>


> Werner also has a bent shaft touring paddle and a new version with a foam 
> core blade.  I have a Werner WW paddle with their version of a bent shaft 
> and I prefer it to the AT.  It feels much more natural to me.
> 
> http://www.wernerpaddles.com/premtour.htm
> 

This shaft is interesting in that there's an extra bit of bending.  There are three
variations on bent shafts.  One places the paddle ahead of the hand, one 
places it behind and the other, like this Werner, is neutral.

If the paddle is ahead of the hand, the paddle will tend to turn away and requires
a firm grip.  I understand some competitive paddlers like this.

If the paddle trails, it acts like a caster wheel and follows the direction
the hand leads.  Most bent shafts seem to adopt this design.  The only problem 
I've had with this is on a high-speed running draw with the shaft near vertical.  The 
paddle wants to twist in your hand and, if held near the hip close to the kayak, tries 
to catch and flip you.  Again, a firm grip is required.  On the other hand, the paddle 
practically sets itself up in a roll.

The Werner adds an extra bit of bending to prevent castering.  However, it looks as 
though you'll get a bit of the other paddles' behavior (either castering with or against 
your stroke direction) if you hold the bent portion near the ends of the grip zone.  My 
guess is that this effect will be fairly small.  This neutral balance is probably what feels 
natural.

Mike

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:33:24 PDT