PaddleWise by thread

From: Peter Staehling <staehpj1_at_yahoo.com>
subject: Re: [Paddlewise] Doug's Ultimate Drysuit
Date: Fri, 1 Mar 2002 04:22:46 -0800 (PST)
--- John Blackburn <digipixs_at_erols.com> wrote:
> The guys in
> the ski shops say to wash the shell, I've done that
> and not noticed any real
> difference.  The next step was to apply a treatment
> to the outer layer, sorta
> like a water repellent to the nylon outer shell (the
> Gortex is under the outer
> shell) and it didn't work any better.

I would be very skeptical about applying anything to
the outside unless the fabric manufacturer recommended
it.

I remember a few years ago reading about another
option.  There was discussion (on rbp I think) about
ironing goretex to reactivate it.  I do not remember
the particulars.  I am not recommending it, but it was
supposed to be recommended by someone at Gore and
Assoc. or one of the garment manufacturers (I forget
which).  I wouldn't do this with out checking with
Gore or the garment manufacturer.

Anyone know anything about this or did I dream it?

Pete Staehling

Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com
***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Jed <jluby_at_teamnorthatlantic.com>
subject: RE: [Paddlewise] Doug's Ultimate Drysuit
Date: Fri, 1 Mar 2002 07:48:39 -0500
	I've heard about the Durable Water Repellent (DWR) being activated by heat
and ironing seems to be the preferred method since putting the whole suit
through the dryer risks damage to the latex seals.

-----Original Message-----
From: Peter

I remember a few years ago reading about another
option.  There was discussion (on rbp I think) about
ironing goretex to reactivate it.  I do not remember
the particulars.  I am not recommending it, but it was
supposed to be recommended by someone at Gore and
Assoc. or one of the garment manufacturers (I forget
which).  I wouldn't do this with out checking with
Gore or the garment manufacturer.

Anyone know anything about this or did I dream it?

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:33:28 PDT