Gabriel, Two 1/8 inch holes, one for each butt cheek indentation. I made the repair by temporarily putting masking tape over the outside of the hull holes, filling the holes with epoxy, and using two small six ounce fiberglass cloth squares on the inside of the hull over each hole. The holes are now the strongest part of the hull, but there is that cosmetic blemish. Duane *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Sat Sep 28 2002 - 15:50:32 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:59 PDT