Re: [Paddlewise] deck rigging

From: Alex Ferguson <a.ferguson_at_chem.canterbury.ac.nz>
Date: Mon, 30 Sep 2002 09:07:50 +1200
>  for my Arctic Tern:  drilling holes slightly smaller than the shock cord 
> diameter directly through the deck and threading the shock cords so that 
> they expand to fill the holes.
>
>Has anybody tried this and want to discourage/encourage me?

Yes, discourge you that is.

>   Any other ideas?

The only real concern is the use of bungy. You don't need it though it can 
be handy to hold a map down on the deck. You DO need deck lines and they 
should NOT be bungy. Rope deck lines all the way round the edge of the deck 
for a REAL (TM) sea kayak.

You can tie the bungy across the deck to the decklines if needed. I use a 
deck bag of fine mesh in front of me, clipped  to the decklines. It holds 
navigation instruments (ruler) waterbottle, towline, knife, sunscreen etc.) 
and a map can be slid under it and still be visible between the bag and the 
cockit rim.

There is bungy often hooked across the aft deck holding a spare paddle 
though even they can be slipped under the deckbag in front.

Alex
.
.


***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
Received on Sun Sep 29 2002 - 14:08:09 PDT

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:59 PDT