PaddleWise by thread

From: Chuck Holst <cholst_at_bitstream.net>
subject: RE: [Paddlewise] hatch fasteners
Date: Wed, 1 Jan 2003 15:32:46 -0600
>>
Chuck is snipped:  A fellow in our kayak club made a stich-and-glue kayak 
in
which the hatch covers are held down by internal bungees.

I tested a prototype kayak with this rig and during a cowboy rescue, my 
skirt
caught the hatch and it is now in Davey Jones' Locker.  I recommended they
use a different system, despite the good looks.

Brian Blankinship
>>

I wouldn't expect this to happen if the hatch cover were flush with the 
deck or a fairly strong pair of bungees were used. As I recall, the one I 
looked at required a fairly strong pull to open the hatch far enough to to 
unhook the bungee.

Chuck Holst


***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:33:32 PDT