Shawn Baker wrote: >Cut the coaming away from the boat about 1" outside the edge of the >outside of the coaming lip. Cut another 1" ring out of the deck. Use >hot glue and wood blocks to glue the coaming in its new position. > >Glue some small wood blocks to form the new slope of the recess (see: >http://www.geocities.com/shawnkayak/cormorant/#deck recess) [or, more >ambitious glassers could simply drape cloth] between the cutout and the >inset coaming. Glass inside and out. Paint. enjoy! Sounds like a great winter project. I'll try the hard foam build-up as a temporary fix for now. Thanks, Brian *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Wed May 14 2003 - 09:31:01 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:07 PDT