> Has anyone tried Krylon Fusion paint on their polyethylene kayak? > Ken, I'd stay away from painting polyethylene. I don't know of much that will stick to it. You may also compromise the plastic by doing it through a chemical reaction with the solvents in the paint. Your best bet would be the simplest: buy a bag of disposable razors and shave the hull. A razor will remove all the flash & fuzz & get you only as deep as you have to go. Then, coat the boat with 303, and it'll look a lot better. Heat guns & chemicals can have side effects that you don't want. Wayne Wayne Smith wsmith16_at_charter.net Check out my website! http://webpages.charter.net/wsmith16/home.html *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Mon Jun 14 2004 - 09:57:45 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:15 PDT