Have you considered plywood anchors? Maybe 1 foot square (or round), for each "stake" location. Loop some 1/4" line with appropriate length through a couple of holes in the center of each piece to connect the tent loop. Burry the plywood anchors as deep as necessary. I have no idea if this will stand up in wind, but it seems like it will. Steve Brown -----Original Message----- ......... Problem is, the tent pads that you must stay on are a gravel pad at least 1 foot deep (that's as far as I dug looking for solid ground........ Rick *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Mon Aug 16 2004 - 13:58:58 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:16 PDT