> I use the following wheels on carts with success, has bearings, 12" diameter: > http://www.northerntool.com/webapp/wcs/stores/servlet/ProductDisplay?storeId =6970&productId=13794&R=13794 I only wish they had it in 10"x2", or 10"x3" size, - 12.5" diameter is a little bit large to store under deck. Doable, but with some pain , when trip is long and bulkhead is full. I've They also have non-bearings wheels for Primex/Roleez for $10. > Also comes in an 8" diameter (also slightly narrower it appears): > http://www.northerntool.com/webapp/wcs/stores/servlet/ProductDisplay?storeId =6970&productId=200199624&R=200199624 It's much more narrow, - 1.25" vs 2.25". It will work poorly on sand for this reason (my 8"x1.75" works so-so), and there is another challenge - 5/16" axle won't fit my 1/2" axle - have to make another cart :-)... *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Mon Jan 31 2005 - 11:24:50 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:19 PDT