Keith Wrage <keith.wrage_at_charter.net> wrote: >A nice place to store large flat prints (like blueprints) is to clip them >together with either a pair of large binder clips or squeeze clamps from >the garage. Couple of nails on the back of a closet door and the prints >will hang nice and flat and out of the way. I've used a commercial product called Map Seal with good success (as opposed to "bad success" i.e. "failure":-) I have noticed that Map Seal coated charts tend to stick to one another if stored under pressure, which would make me hesitate to use Keith's otherwise clever storage idea. Philip *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Fri Feb 04 2005 - 15:14:48 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:19 PDT