I thought there were problems/recalls with the Hulivator, but I'm not sure. There is a "Hulivator" like ladder lifter that the professionals use with their cube vans, but I assume they are expensive and not specific for kayak use, obviously. Matt's ideas will work; you might want to supplement with a small step ladder. Get one that has a wide base for stability. I use a small one and my vehicle is lower than yours. A well-mounted back hull roller will work too, but the ladder may be needed to finish getting the kayak up top fully and forward into the front saddle. I have seen hull rollers set up like this for aluminum fishing boats, but they are more elaborate. I see a lot of heavily modified vans around Vancouver Island - modified for camping needs. Often, they include a ladder up to the cargo-roof rack. DL > --- Michael Daly <mikedaly_at_magma.ca> wrote: > >> Doug Lloyd wrote: >> > Guys around here that buy these for work vans have >> racks welded up for >> > them, permanently mounted (usually to carry >> ladders)) >> >> That's not a particularly high roof, either, >> compared to many cube vans. >> That should be easy to do. > > Actually, the height is about 8'. Thats a long way > up. :( I could mount a kayak rack on top, but With > this height the challenge is getting the kayak up to > the rack. > > Matt Broze posted a message about how he does it on an > RV. I'd have to do something similar.... though his > process does sound a little bit precarious. > > I wonder how hard it would be to modify a Hulivator > style rack to do a larger drop.... *ponders* > > Any more thoughts? > Derek *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Wed Mar 28 2007 - 08:15:10 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:23 PDT