Re: [Paddlewise] pressurize the boat

From: Robert Livingston <bearboat2_at_comcast.net>
Date: Wed, 4 Apr 2007 16:04:39 -0700
I have had very good experiences with the Kajak hatches (glued to the  
fiberglass with 3M Sealant 5200). (I have used all the round rubber  
sizes with them all being air-tight.) I have not used their larger  
Oval ones although the biggest round one at about 9" seems like a  
beautiful gapping hole if you grew up with the old screw down hatches  
of my old Baidarka at about 7" and suits me fine as a camping kayaker.



On Apr 4, 2007, at 3:02 PM, Peter Treby wrote:

> Other than VCP rubber hatches, the only other hatch cover I have  
> seen which keeps a compartment completely dry
***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
Received on Wed Apr 04 2007 - 16:04:57 PDT

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:24 PDT