Michael Daly wrote: > Before drilling, just pull the pipe off the thru-hull and test it with > the pipe opening at the same height as the hull. Duh... make that - the same height as the _deck_ where the fitting is. That produces the same head for the pump to push against. Mike *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Tue Apr 17 2007 - 12:40:44 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:24 PDT