I happened to see the following in rbp: ANGST <angst_at_utc.campus.mci.net> wrote in article <3544C437.63E83290_at_utc.campus.mci.net>... > M metelman wrote: > > > > Anyone know where I can get a thinner bildge pump for kayaking? > > Ive tinkered with this at length with only limited success. My goal was > to make a pump that you could get your water out of your squirt boat > with out having to pop the skirt. > > The most successful thing that I have seen so far is a guy in Alabama > that used a bulb pump for priming gas tanks on motor boats. They are $8 > bucks and you can get em at Wal mart. He attached it to the Bulkhead of > his Corsica and just pressed his foot when he needed to pump. He ran > the tube to a hole drilled in the deck. The valve is one way so you > spray water out when you are pumping with your foot and it locks off > when you are not. > At the hardware store you can get a pump for siphoning kerosene for > about $10. Ive tried this. The tube is pretty big diameter for > drilling a hole on your boat, but you may be willing to run the tube out > your skirt every time. I anchored the pump near my thigh and squeezed > it through the skirt. I got weird looks, but it worked all right. The > one way valve on this type of pump isn't that solid though and you get a > little back flow. > > Ive tried numerous ways of doing it electrically without success. If > anyone knows a supplier of a SMALL (read very very small) submersible > pump. Please pass the info on. > eric z > www.come.to/squirt > remove the nospam to reply > *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Mon Apr 27 1998 - 11:51:56 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:29:56 PDT