> > The closed minicell foam is sealed in with 3M 5200 or similar sealant, and it > stays there forever! The sealant does take a week or so to cure completely, > though. > For my wood stripper, I cut out foam bulkheads just slightly oversized, popped into place, and got a perfect seal without using any sealant. On my old kevlar boat though, the sealant has failed around the foam bulkheads because the kevlar flexes too much. *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Thu Jan 14 1999 - 17:13:08 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:03 PDT