Is there a danger these could blow out in a capsize? I too used foam bulkheads in my stripper. I cut them quite a bit oversize so there is a very tight fit. I haven't sealed them in yet because I haven't varnished it yet, but I do have float bags in as well. Woody -----Original Message----- >For my wood stripper, I cut out foam bulkheads just slightly oversized, >popped into place, and got a perfect seal without using any sealant. On >my old kevlar boat though, the sealant has failed around the foam >bulkheads because the kevlar flexes too much. *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Thu Jan 14 1999 - 18:10:11 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:03 PDT