RE: [Paddlewise] Durability Testing

From: Chuck Holst <CHUCK_at_multitech.com>
Date: Thu, 6 Jan 2000 16:01:29 -0600
>>
Just a thought: Would it be prohibitive to lay up an extra layer of glass
inside your current north American boat? The extra layer of glass should
make your boat far superior than the extra epoxy of a hand laid up boat.

Woody
>>

***************************************************************************

You could probably order the boat with extra glass. I bought my old
Sealution second-hand, and the previous owner had ordered it with a
reinforced deck. The deck was definitely stiffer than that of the production
Sealution, which I thought was way too flimsy.

As for Romanys, I inadvertently gave my Romany Explorer a couple of stress
tests while the kayak was strapped on the car by filling the fore and aft
compartments with water to check for leaks. Some time after, I noticed four
slight dimplings in the hull where it comes into contact with the rack, and
a slight stress crack in the gelcoat on the foredeck, but that's all, and I
really don't know whether they were caused by my tests or not. I certainly
didn't hear any groans or cracking sounds during the tests.

Chuck Holst
***************************************************************************
PaddleWise Paddling Mailing List - All postings copyright the author and not
to be reproduced outside PaddleWise without author's permission
Submissions:     paddlewise_at_lists.intelenet.net
Subscriptions:   paddlewise-request_at_lists.intelenet.net
Website:         http://www.paddlewise.net/
***************************************************************************
Received on Thu Jan 06 2000 - 13:58:05 PST

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:18 PDT