> Should I use Vynabond to glue these in, >or some other adhesive? Does anyone know if Vynabond would work with the >minicell pads? That's what I use all the time. Never had a problem. > >Also, I have a nice coating of adhesive residue on the hull now... any >suggestions for removing this adhesive that wouldn't damage the Royalex? It's actually the vinyl coating over the ABS. When I had to do this I picked and picked at it until I could peel most of it off. Then used acetone sparingly to remove it. 91% Isopropyl alcohol is a good cleaner/degreaser to prep the surface before glueing. > *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced/forwarded outside PaddleWise without author's permission Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Tue Jul 25 2000 - 10:27:00 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:28 PDT