on 8/19/00 5:33 AM, Dave Kruger at dkruger_at_pacifier.com wrote: > Velcro to minicell foam, at least two years, sans abuse. > > Velcro to surface of a Thermarest pad, three years, also sans abuse. Neither > shows any signs of loss of adhesion. > > Velcro or minicell **to polyethylene** (such as in typical WW boat), can peel > off the PE after a year or so, unless you are vigorously aggressive in > roughing > up the PE. > > Caveat: there **may** be some difference between the Perception stuff and > Weldwood, though I bet it won't make any difference except for rare > applications snip Thanks for the information Dave. You seem to be getting the same results with Weldwood that I've had with the Perception contact cement. I get good results on the plastic if I clean it first with acetone then rough it up with sand paper then use acetone again before applying a couple coats of contact cement. I let the first coat dry for about 15 minutes then apply the second, doing the same on the foam or velcro. Did you have trouble with the velcro trying to curl up after you put the Weldwood contact cement on? I like the Marine Goop better for velcro because it is thicker. I can apply one coat and the velcro does not curl up. My Goop tests have resulted in an excellent bond with foam/fiberglass, foam/foam, velcro/fiberglass, and velcro/foam but I have not tried it with plastic yet. Someone else on the list did and had a good result and the instructions say it can be used for plastic. I sound like a salesman for Goop but have no connection with them, yet. :) Thanks again Dave and good luck on the Folbot. Anyone else out there using Weldwood? or Goop? Rex *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced/forwarded outside PaddleWise without author's permission Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Sat Aug 19 2000 - 06:37:58 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:30 PDT