[Paddlewise] Looking For Recommendations

My thanks to all of you Wise Paddlers around the  globe who provided all sorts
of information about electric pumps in response to my inquiry about three
weeks ago.  Wow!  That was a subject that really touched a lot of
nerves/hearts.  I appreciate every bit of your information.   And now, another
subject.........





I recently acquired a used plastic boat made by Dagger, an 11' 6" "Blackwater"
which I intend to use  in conditions where I might stand a good chance of
abusing my kevlar touring hull going through shallow, rocky bottom riffles,
etc.  This boat doesn't have any bulkheads.  I intend to build-in a bulkhead
behind the cockpit.  I have heard that "normal" fiber glassing will not adhere
to this plastic hull.  I expect to make a pattern by cutting cardboard or
something similar to the shape of the outside of the hull., a sort of a
negative  of the bulkhead.   What would be a good material for the bulkhead
itself?  And what would be a good way to "glue" it in place? 





Open to any and all recommendations,





Ol' Dave 



***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************