PaddleWise by thread

From: Kevin Whilden <kevin_at_yourplanetearth.org>
subject: [Paddlewise] making drybags
Date: Thu, 13 Jun 2002 15:12:02 -0700
So I need to make a long and skinny drybag for my didgeridoo.  What is the
current state-of-the-art thinking in regards to home-made drybags?  Is a
sewing machine necessary?
Thanks!
Kevin Whilden

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Paul Raymond <kayaker37_at_hotmail.com>
subject: Re: [Paddlewise] making drybags
Date: Thu, 13 Jun 2002 21:04:00 -0400
Here is a link to an article to make your own from heat sealable fabric:

http://www.isk.canoe-kayak.org/howto/drybags.pdf

You can get the material from Seatle Fabrics here:

http://www.seattlefabrics.com/nylons_frameset.html

What is a didgeridoo?

>So I need to make a long and skinny drybag for my didgeridoo.  What is the
>current state-of-the-art thinking in regards to home-made drybags?  Is a
>sewing machine necessary?


_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail. 
http://www.hotmail.com

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: David Seng <daveseng_at_acsalaska.net>
subject: RE: [Paddlewise] making drybags
Date: Thu, 13 Jun 2002 18:29:44 -0800
  I made a dry bag just the other night by following the instructions
provided by Chuck Holst in the article referenced below and some Seattle
Fabrics heat sealable material.  It works great!  The end result is a
drybag remarkably similar to the Sealine Kodiak Sacs.

Dave Seng
Juneau, Alaska

 
> Here is a link to an article to make your own from heat 
> sealable fabric:
> 
> http://www.isk.canoe-kayak.org/howto/drybags.pdf
> 
> You can get the material from Seatle Fabrics here:
> 
http://www.seattlefabrics.com/nylons_frameset.html


***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Alex Ferguson <a.ferguson_at_chem.canterbury.ac.nz>
subject: Re: [Paddlewise] making drybags
Date: Fri, 14 Jun 2002 13:37:36 +1200
>So I need to make a long and skinny drybag for my didgeridoo.  What is the
>current state-of-the-art thinking in regards to home-made drybags?  Is a
>sewing machine necessary?

I buy PVC reinforced wet-weather trousers, about $10 each. Cut a leg off, 
glue the foot end of the leg and glue tape (with stiffening?) along the 
top, down about an inch from the top. This webbing tape has a Fastex 
buckle, male and female, one on each side (with the bag lying flat on the 
table). One pair of trousers equals two dry bags - buy XXL size.

For the length of a didgeridoo you'd need to take the trousers all the way 
up to the "belt" and glue some of the side which would have been the middle 
of the trousers.

The glue is a PVC glue specially for the job - stays flexible.

The material is nice and flexible too.

A didgeridoo, for the person who asked, is an Australian wind instrument 
made from a hollow, straight branch, about 2-3 inches in diameter and about 
a yard long. You "grunt" into it rather than play it like a flute. The 
trick is to keep blowing out (by mouth) while breathing in through the nose 
so that the sound is continuous.

Alex
.
.

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: <Rcgibbert_at_aol.com>
subject: Re: [Paddlewise] making drybags
Date: Thu, 13 Jun 2002 22:30:58 EDT
In a message dated 6/13/2002 3:11:15 PM Pacific Daylight Time, 
kevin_at_yourplanetearth.org writes:


> So I need to make a long and skinny drybag for my didgeridoo.  What is the
> current state-of-the-art thinking in regards to home-made drybags?  Is a
> sewing machine necessary?
> Thanks!
> Kevin Whilden

If ya wanna go Low Bid, try a good hot iron and edge it with a strip of duct 
tape. My bet is it may last as long.

All the best t'yall
Rob G

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Paul Raymond <kayaker37_at_hotmail.com>
subject: Re: [Paddlewise] making drybags
Date: Thu, 13 Jun 2002 22:39:58 -0400
What kind of glue do you use? I have used HH-66 vinyl cement on other pvc 
material.

>The glue is a PVC glue specially for the job - stays flexible.


_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Alex Ferguson <a.ferguson_at_chem.canterbury.ac.nz>
subject: Re: [Paddlewise] making drybags
Date: Fri, 14 Jun 2002 16:37:26 +1200
>What kind of glue do you use? I have used HH-66 vinyl cement on other pvc 
>material.
>
>>The glue is a PVC glue specially for the job - stays flexible.

Ados 777 or 999. I didn't quote it as I don't know if it is suplied in 
North America. The material is cleaned first with something like acetone 
that Ados also supplies.

I also use it for folding kayak skin gluing.

Alex
.
.


***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************
From: Grant Glazer <grant_glazer_at_xtra.co.nz>
subject: Re: [Paddlewise] making drybags
Date: Fri, 14 Jun 2002 18:39:39 +1200
Heat sealable canvas is more common then you would think.  Just go to any
canvas store and pick out any material heavily coated with plastic on both
sides.  If you use an iron, I found baking paper to be ideal in keeping the
iron clean and to stop it sticking ( the wife will never know that you have
been ironing!).  I made 6 bags of various sizes for $50NZ, all are water
tight.  I like the trouser idea though - even cheaper.

Cheers
Grant
______________________________________

Want Kayaking information on Waiheke  Island?
http://www.issystems.co.nz/kayak/index.html
----- Original Message -----
From: "Kevin Whilden" <kevin_at_yourplanetearth.org>
To: "PaddleWise" <paddlewise_at_paddlewise.net>
Sent: Friday, June 14, 2002 10:12 AM
Subject: [Paddlewise] making drybags

***************************************************************************
PaddleWise Paddling Mailing List - Any opinions or suggestions expressed
here are solely those of the writer(s). You must assume the entire
responsibility for reliance upon them. All postings copyright the author.
Submissions:     PaddleWise_at_PaddleWise.net
Subscriptions:   PaddleWise-request_at_PaddleWise.net
Website:         http://www.paddlewise.net/
***************************************************************************

This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:33:29 PDT