>> What is the simplest, effective way to mount a compass on a yak without drilling, cutting adn bolting it thru the deck? What is teh compass ofchoice for this application? John >> ************************************************************************** * When I had my old fiberglass Sealution, I cut a base for my Sailor II compass from a piece of one-by-six pine, carved out the bottom to fit the curve and slope of the deck, then sanded it, waterproofed it with epoxy resin, painted it with black auto paint to match the compass, and finally fastened it to the deck with silicone adhesive. The adhesive held tightly until I decided to move the compass forward, when I was able to pry it loose and, after a little cleanup, reglue it in its new location with more silicone adhesive. Chuck Holst *************************************************************************** PaddleWise Paddling Mailing List Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.gasp-seakayak.net/paddlewise/ ***************************************************************************Received on Tue Nov 03 1998 - 08:12:35 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:00 PDT