Hi Nick, > -----Original Message----- > From: owner-paddlewise_at_lists.intelenet.net > [mailto:owner-paddlewise_at_lists.intelenet.net]On Behalf Of Nick Von > Robison <SNIP> >The Yakima cross bars are > round in cross > section, and no matter how much I tweak the locking bolts there > is still some > roatation of the cross bar when taking off/putting on the boat. > It's not a big > deal, but mostly a nuisance as I have to readjust the rollers > every time. This isn't a guaranteed fix but I have found that it works most of the time. The problem is that the rollers don't spin as freely as they should so they pivot on the bar instead. Try a little silicone spray on the friction points of the rollers. You might be amazed at the difference it makes. Hope this helps. Cheers, -- Rob Cookson 3 Hats Design INTERNET PRINT ILLUSTRATION 5201 15 Ave NW Suite 220 Seattle, WA 98107 206.851.8202 direct line 206.784.1641 main office phone 206.784.2231 main office fax mailto:rob_at_3hats.com http://www.3hats.com *************************************************************************** PaddleWise Paddling Mailing List - All postings copyright the author and not to be reproduced outside PaddleWise without author's permission Submissions: paddlewise_at_lists.intelenet.net Subscriptions: paddlewise-request_at_lists.intelenet.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Tue Mar 14 2000 - 16:38:48 PST
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:30:21 PDT