Jeff Van Cott posted (snip): >I stopped reading all that stuff a while ago. It needs a different venue.< You must have read some of it to make that comment more recently. :-) List moderator said: >[moderator followup - I disagree ;-) I've learned a fair bit about the laws with regard to boat design, and there have been several good spin off threads]< I agree, as long as everyone stays civil. I doubt I'd have seriously considered making my own kayak without this thread coming up and going down some of the bunny trails it did. Making some European-bench style boat sawhorses this week out of 3X3 laminated pine, two full crossmembers, two uprights, all bolted together with 30" 3/8' threaded rod through the two vertical members on each stand. Feet are 2X6X30 pine with Honduras mahogany feet with adjustable levellers. Should be stable enough. Can't wait to see what boats get built on these stands! Doug Lloyd Victoria BC *************************************************************************** PaddleWise Paddling Mailing List - Any opinions or suggestions expressed here are solely those of the writer(s). You must assume the entire responsibility for reliance upon them. All postings copyright the author. Submissions: PaddleWise_at_PaddleWise.net Subscriptions: PaddleWise-request_at_PaddleWise.net Website: http://www.paddlewise.net/ ***************************************************************************Received on Tue Aug 24 2004 - 18:36:04 PDT
This archive was generated by hypermail 2.4.0 : Thu Aug 21 2025 - 16:31:16 PDT